The BXWF series micro flotation air flotation machine is a newly developed high-tech sewage treatment equipment that greatly improves the effectiveness of sewage treatment through new rectification measures.

characteristic:

A、 The machine is equipped with a gas dissolution system, and the average diameter of microbubbles is below 1 μ m. Compared with the current level of 20-50 μ m at home and abroad, it is reduced by at least 20 times. That is, when the gas dissolution volume is equal, the total surface area of microbubbles increases by at least 400 times. In fact, due to the significant increase in gas solubility, the total surface area or bubble density of microbubbles has increased by thousands of times. Research by foreign scholars has shown that when the diameter of microbubbles is less than a certain value, according to statistical mechanics, the impact force of thermal motion of surrounding water molecules will be unbalanced, and the bubbles will participate in partial Brownian motion. In order to facilitate the diffusion of oxygen molecules inside the bubbles into the sewage, the aeration effect is much higher than thousands of times;

B、 The machine adopts a special stainless steel structure, which plays an unprecedented role in rectification and current stabilization, as well as a special release system, which maximizes the removal of energy from dissolved gas and water, that is to say, reduces the dissolved gas from the equilibrium high energy value to a low energy value almost close to atmospheric pressure;

C、 The device has a compact structure, miniaturization, and small footprint; If processing 1000-4000 cubic meters of white water per day, the equipment height is only 5.5 meters and covers an area of 10 square meters, it can be completely installed inside the workshop;

D、 This machine consumes less power and can reduce it by more than 50% compared to ordinary air flotation machines;

E、 Less drug consumption, which can be reduced by more than 50% compared to ordinary air flotation machines;

F、 The slag concentration is high, reaching over 4%, the effluent is clear and transparent, the SS removal rate is over 96%, and insoluble COD can be completely removed.